 |
 |
|
for industrial, and municipal wastewater, water and groundwater. |
|
|
|
|
|
for industrial, and municipal wastewater, water and groundwater. |
|
|
Benefits: A more consistent and predictable solution than any other method on the market. Solution does not cause the typical maintenance problems such as clogging and scaling associated with gas and bleach. This improves dependability and considerably extends the service intervals. More efficient: Minimal flow of water needed to create the solution. Uses just 10 amps of 110VAC power. Safer: The system makes frequent batches of 1/4% solution strength, falling below levels considered to be hazardous. The solution is used for the elimination of microbes in drinking water and is safe enough to handle without having to comply with costly EPA and OSHA regulations or expensive liability insurance. Lower operating costs: Efficiency, dependability and safety provide for lower overall operating costs. Also, Tab Saver® design extends tablet life, by providing a constant and sustainable erosion rate. |
| Applications: One system meets most applications Performance: Typical 50-2000 gpm wells with residual to 2.0 ppm Chlorine delivery: 0-3 lbs./hour with optional delivery to 30 lbs./hour Tablet capacity: 80 pounds Power: Standard 110 VAC, 10 amps Discharge pressure: 250 PSI Chart recorder: Optional - 8 hour, 24 hour or 7 day, single pen Frame material: Hot dip galvanized angle iron Dimensions: 24" X 59" X 49" Weight: 260 pounds UL® listed: yes SCADA ready: yes |
|
|
 |
1 Water enters system at a fixed rate of 2 gallons per minute 2 Vortex feeder generates desired solution strength 3 Solution storage ready for injection 4 Variable speed pump injects solution at appropriate rate 5 Level control calls for additional solution as required 6 System controls either manual or automatic operation 7 Optional chlorine analyzer automatically controls variable speed pump and maintains set point chlorine residual |
|
Click here to acquire additional information about our products and systems |
|
866 Podva Road Danville, CA 94526 E-mail: sales@ryanprocess.com |
No. California & Western Nevada Only otherwise call (925) 837-0670 Fax (925) 837-4832 |
|
New
technology: The magnetic stir bar creates a controlled vortex
within the erosion chamber. The vortex creates positive and negative
pressures allowing for recirculation of the solution making it
possible to vary solution strength without changing the flow
rate through the system. PPG's three-inch calcium hypochlorite
Accu-Tabs are used to produce a consistent solution that can
be injected at controlled rates into the water supply. The system
features off-the-shelf, plug and play technology and requires
no custom engineering.