 |
 |
|
for industrial, and municipal wastewater, water and groundwater. |
|
|
|
|
|
for industrial, and municipal wastewater, water and groundwater. |
|
| Pipe cleaning programs using polly pigs can restore many underground piping systems to new or almost-new condition and avoid the costly, disruptive messiness of replacement projects. |
|
|
| STANDARD RED SERIES 5-8 lb/ft3 | |
 |
Standard Red Series recommended for Pipeline applications up to 25 miles/41 kilometers in length. Medium Density foam and tough red coating yields a strong resistance to wear yet remains flexible. Some models may be used in pipelines with minor cross sectional diameter reductions or restrictions. |
| DURABLE CRIMSON SERIES SERIES 9/10 lb/ft3 | |
 |
Durable Crimson Series recommended for pipeline applications exceeding 25 miles/41 kilometers in length or where internal pipe conditions are extremely rough. Hard Density durable foam and toughest crimson coating give maximum wear resistance. Suggested for use in constant dimensional lines and 1 1/2 radius or greater bends. |
| FLEXIBLE BLUE SERIES 5-8 lb/ft3 | |
 |
Same Medium Density foam as Red Series with a softer, more flexible blue coating. Ideal for use in lines with major reductions in cross sectional area and short radius bends. |
| MAXIMUM CLEANING SERIES - VARIOUS FOAM DENSITIES AND COATINGS | |
 |
Maximum cleaning series are available in various densities and designs. The SUPER JAVELINA is totally covered with wire brush straps in a slight spiral pattern. The POWER BRUSH, totally coated with wire brush straps in a straight pattern design, allows sufficient by-pass to clean the brushes and suspend debris ahead of the cleaner. Both the SUPER JAVELINA and POWER BRUSH cleaners are designed for long runs. The SHARK is totally covered with Silicone Carbide chips and designed for shorter runs. The STUD cleaner has steel studs embedded in durable foam for removing hard scales. |
| SWAB SERIES 1,2 and lb/ft3 | |
 |
Soft Bare Swabs available, 1, 2 or 4 lb/ft density foams. Available with flat or tapered nose. Maximum flexibility to negotiate extreme reductions in cross sectional diameter and tight bends. The HYDROPIG is available in 2 lb/ft density foam with flexible blue coating. Wire brush straps or silicone carbide can be incorporated in coating. |
| HAND-LAUNCH PIG | |
 |
Easy
to use, one size fits all pipe of that diameter - a 6-inch Hand-Launch
Pig can be inserted, by hand, into all 6-inch pipe, from Class
50 Ductile Iron Pipe to 6-inch Schedule 160 Steel Pipe. It saves the operator the considerable expense of launchers, a simple, line-sized wye fitting with a removable blind flange is sufficient to get the pig into the pipeline. It's manufactured using urethane foam and elastomer that is softer than the pipeline material - no damage! |
| DISC PIGS | |
 |
Our disc pigs offers the pipeline operator a pig with the scraping ability of a disc pig and the flexibility of a foam pig. The Foam Pig's multiple scraping surfaces provide superior wiping power in a pig that can be inserted into the system without the necessity of an expensive launcher. As with all our pigs, the Disc Pig is available in a variety of foam densities and coatings. |
| ULTRA-SEAL PIGS Unique Ultra-Seal Pig is indeed "One of a Kind". Designed for demanding applications where only minimal product by-pass can be tolerated, the Ultra-Seal delivers as promised with the lowest measurable by-pass in the pigging industry. The Ultra-Seal Pig is available in numerous configurations to meet specific pipeline conditions. Foam density can be varied from 2 pounds per cubic foot through 10 pounds per cubic foot, while the hardness of the elastomeric backbone can be as soft and pliable as 60 Shore A, or as hard and durable as 90 Shore A Durometer.
|
|||||
| DC-CUP: The Strongest
and the Longest Wearing Polyurethane Cup For Pipeline Pigs PATENTED SURFACE BEARING AREA DESIGN AND FLEX POINT OFFER THE MAXIMUM IN WEAR RESISTANCE AND SEALING ABILITY The DC Cup has three times more wear surface in contact with the pipe wall for extended cup life. The Flex Point allows the wear surface to be held consistently in firm contact with the pipe wall for superior sealing. |
 |
SUPERIOR SCRAPING EDGE THE STRENGTH TO SUPPORT THE HEAVIEST
INSPECTION TOOLS MOUNTING DIMENSIONS TO FIT ALL
MANUFACTURER'S MANDREL-TYPE PIGS AVAILABLE IN ULTRATHANE, THE
ULTRA PERFORMANCE URETHANE |
|
|
Click here to acquire additional information about our products and systems |
|
866 Podva Road Danville, CA 94526 E-mail: sales@ryanprocess.com |
No. California & Western Nevada Only otherwise call (925) 837-0670 Fax (925) 837-4832 |
|
